3-t-Butylaminopropyl Trimethoxysilane

3-t-Butylaminopropyl Trimethoxysilane - Names and Identifiers

Name	N-tert-butyl-3-(trimethoxysilyl)propan-1-amine
Synonyms	LogP T-BUTYLAMINOPROPYLTRIMETHOXYSILANE 3-t-Butylaminopropyl Trimethoxysilane N-tert-butyl-3-(trimethoxysilyl)propan-1-amine 2-methyl-N-(3-trimethoxysilylpropyl)propan-2-amine
CAS	174219-86-4
InChI	InChI=1/C10H25NO3Si/c1-10(2,3)11-8-7-9-15(12-4,13-5)14-6/h11H,7-9H2,1-6H3

3-t-Butylaminopropyl Trimethoxysilane - Physico-chemical Properties

Molecular Formula	C10H25NO3Si
Molar Mass	235.4
Density	0,924 g/cm3
Boling Point	98-99°C 3mm
Flash Point	108°C
Vapor Presure	0.0526mmHg at 25°C
Specific Gravity	0.924
Sensitive	7: reacts slowly with moisture/water
Refractive Index	1.4208

3-t-Butylaminopropyl Trimethoxysilane - Risk and Safety

Risk Codes	R20/21/22 - Harmful by inhalation, in contact with skin and if swallowed. R36/37/38 - Irritating to eyes, respiratory system and skin.
Safety Description	S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.

3-t-Butylaminopropyl Trimethoxysilane - Introduction

N-tert-butyl-3-(trimethoxysilyl)propan-1-amine is an organosilicon compound with the chemical formula C11H27NO3Si, often abbreviated as SAS. The following is a description of the nature, use, preparation and safety information of N-tert-butyl-3-(trimethoxysilyl)propan-1-amine:

Nature:
-Appearance: Colorless to light yellow liquid
-Molecular weight: 249.42
-Boiling point: About 220-250 degrees Celsius
-Density: 0.950-0.970g/cm³
-refractive index: 1.428-432
-insoluble in water, soluble in organic solvents such as alcohols, ethers, etc.

Use:
- N-tert-butyl-3-(trimethoxysilyl)propan-1-amine are often used as polymer surface wetting agents, leveling agents and water resistance agents in the chemical industry.
-can be used in coatings, inks, adhesives, improve the water resistance of the coating, adhesion and adhesion.
-In fiber treatment, it can be used to improve the adhesion and water resistance of fibers to polymers.
-In the electronics industry, it can be used as a surface treatment agent for electronic components.

Method:
The preparation of N-tert-butyl-3-(trimethoxysilyl)propan-1-amine is generally accomplished by reacting trimethoxysilane with aminopropanol. Specific reaction conditions and steps please refer to the relevant literature or professional manual.

Safety Information:
- N-tert-butyl-3-(trimethoxysilyl)propan-1-amine should be stored in a cool, dry place, and away from fire and open flame.
-use should wear protective glasses and masks, avoid direct contact with the skin and inhalation of its vapor.
-such as accidental contact with skin, should immediately rinse with plenty of water, if discomfort, timely medical treatment.
-If the vapor is accidentally inhaled, the patient should be quickly moved to fresh air and seek medical attention immediately.
-Waste shall be disposed of in accordance with relevant laws and regulations and shall not be dumped at will.

Last Update：2024-04-10 22:29:15